CAST IRON EQUILIBRIUM BALL FLOAT VALVE

Complete product range detailed in our catalogue available upon request.

FLANGED: BS 10 Table F DRILLED: BS 4504 PN 10, PN 16 BS 10 Tables D,E,F ANSI B 16.1 Class 125	CONSTRUCTION: 1. Bolted cover plate to protect seal and cylinder from the ingress of debris 2. Maintenance simplified by easily replaceable piston seal and steel reinforced renewable rubber disc 3. Adjustable float for optimum water level control 4. The valves are supplied with line flanges to BST F Diam. Unless otherwise instructed the inlet flange will be drilled to match the the flange specified on order. The outlet flange will not be drilled unless ordered
	PRESSURE / TEMPERATURE RATING: 50mm-200mm 250mm-300mm Temp 10 BAR 7 BAR 3 BAR 7 BAR 7 BAR 3 BAR Cold 60°C 93°C APPROVAL: Water Fittings Byelaws Scheme approved product for nominal sizes 50mm to 200mm inclusive

Dimensions (mm)		FLOW VELOCITY: It is recommended that flow velocity should not exceed 3m/s (10f/s) giving a maximum flow of: J litres/sec K galls/min								Flow Capacity
Nominal Size	A	B	C	D	E	F	G	H	I	J	K	Weight (Kg)
50 80 100 150 200 250 300	125 155 178 229 248 311 350	165 190 228 280 305 381 483	1120 1168 1333 1524 1830 2032 2337	381 463 533 686 800 972 1111	660 813 1003 1244 1473 2032 2590	305 305 356 457 508 508 508	203 292 305 356 356 356 356	203 241 292 356 495 622 698	203 248 267 279 445 445 483	6 14.2 24.7 55.7 98.5 175 260	78 187 326 735 1300 2300 3400	22 33 52 96 143 270 311

Home / Company Profile / Contact and Map / Parallel Slide Valve / Globe Stop Valve
Angle Stop Valve / Swing Check Valve / Equilibrium Ball Float Valve
Bronze Double Regulating Valve / Cast Iron Double Regulating Valve

©Peter Smith Valve Company Limited
TEL: 00 44 (0)115 9272831